No, wood glue and super glue are not suitable for gluing glass. Glass is a non-porous material, and these types of glue are designed for porous surfaces like wood, paper, and fabric. For gluing glass, it is best to use a specialized glass glue or epoxy that is designed to bond non-porous materials. These types of adhesives will provide a strong and durable bond for glass. **

To remove glass glue, you can start by gently scraping off as much of the glue as possible using a razor blade or putty knife. Then, apply a small amount of acetone or nail polish remover to a clean cloth and dab at the remaining glue until it starts to dissolve. You can also try using a commercial adhesive remover specifically designed for glass surfaces. Once the glue has softened, wipe it away with a clean cloth. **

It is not recommended to glue a microwave door glass as it may compromise the safety and functionality of the microwave. The glass on the microwave door is typically held in place by screws and brackets for a secure fit. If the glass is cracked or broken, it is best to replace it with a new one to ensure the microwave continues to operate safely. Attempting to glue the glass may not provide a secure enough hold and could potentially lead to further damage or injury. **

To glue plastic to glass, you can use a strong adhesive specifically designed for bonding these materials, such as a clear epoxy or a cyanoacrylate (super glue). First, clean the surfaces of the plastic and glass with rubbing alcohol to remove any dirt, oil, or residue. Then, apply the adhesive to one of the surfaces and press the plastic and glass together firmly. Allow the adhesive to cure according to the manufacturer's instructions before handling the bonded materials. **

To glue glass to wood, you will need to use a strong adhesive that can bond to both materials. One option is to use a clear epoxy adhesive, which is designed to bond to a variety of surfaces including glass and wood. Make sure to clean and dry both the glass and wood surfaces before applying the adhesive, and follow the manufacturer's instructions for the specific epoxy adhesive you choose. Clamp the glass and wood together while the adhesive sets to ensure a strong bond. **

To glue foam to glass, you can use a strong adhesive such as silicone glue or a hot glue gun. Make sure to clean the glass surface thoroughly before applying the glue to ensure a strong bond. Apply the glue to the foam in small dots or lines, then press the foam firmly onto the glass surface and hold it in place until the glue sets. Allow the glue to fully cure before handling the foam to ensure a secure attachment. **

To glue glass to metal, you will need to use a strong adhesive that is designed to bond these two materials together. One recommended adhesive for this purpose is a clear epoxy glue that is specifically formulated for bonding glass and metal. Make sure to clean and dry both the glass and metal surfaces thoroughly before applying the adhesive. Follow the instructions on the adhesive packaging carefully for the best results, and allow sufficient time for the glue to cure and create a strong bond between the glass and metal. **

To glue glass bottles together, you can use a strong adhesive specifically designed for glass, such as epoxy or silicone glue. First, clean the surfaces of the bottles to remove any dirt or residue. Apply the adhesive to one of the bottle's edges, then press the two bottles together firmly and hold them in place until the glue sets. Allow the glue to fully cure according to the manufacturer's instructions before handling the bottles. **